Product ID:SUPERLOCK BOLTLOCK 2262
MSDS Date:06/21/1990
FSC:8040
NIIN:00N050617
MSDS Number: BVJXX

Emergency Phone: 800-424-9300(CHEMTREC)

Info Phone: 508-777-1100

Cage: HO121

Telephone: 508-777-1100

Cage: HO121

NO INGREDIENT FOR THIS FORMULATION_INGREDIENT

LD50 LC50 Mixture:SEE ING 3
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EYES: SEVERE IRRITATION/BURNS.
SKIN: SEVERE IRRITATION/BURNS. DMT CAN BE ABSORBED THROUGH SKIN.
INHAL: VAPOR AND/OR MIST RESPIRATORY IRRITANT. INGEST: NO DATA.
CHRONIC: SACCHARIN IS POSSIBLE CA RCIN IF INGESTED.
Explanation of Carcinogenicity:SACCHARIN: IARC MONO, SUPP, VOL 7, PG
334, 1987: GRP 2B. ANTIC TO BE A CARCIN (NTP) .
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE KNOWN.

First Aid:EYES: HOLD EYE OPEN AND FLUSH WITH COPIOUS QTY OF WATER FOR
AT LEAST 15 MINUTES. SKIN: WASH WITH SOAP AND WATER. INHAL: MOVE TO
FRESH AIR. GIVE OXYGEN/ARTF RESP; CONSULT PHYS. INGEST: DO NOT
INDUCE VO MIT. IF CONSCIOUS, GIVE WARM WATER; CONSULT PHYS.

Flash Point Method:COC
Flash Point:212F,100C
Extinguishing Media:WATER, CO*2, DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:IN LARGE QTY COULD UNDERGO VIOLENT
POLYMERIZATION GENERATING SIGNIFICANT HEAT AND PRESSURE.

Spill Release Procedures:WEAR PROT CLTHG. DIKE AND ABSORB WITH INERT
MATL SUCH AS NU-DRI; DISCARD IN SUITABLE CONTAINER. CAUTION:
ABSORBED PRODUCT MAY POLYMERIZE GENERATING HEAT; MAY BE NECESSARY
TO VENT CONTAINER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:KEEP AWAY FROM CHILDREN. AVOID SKIN &
EYE CONT. SPRAY/MIST PRESENTS INHAL HAZ. STORE IN A COOL, DRY
LOCATION AWAY FROM DIRECT SUNLIGHT.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Respiratory Protection:NONE NORMALLY NEEDED. WITH SPRAY/MIST,
NIOSH/MSHA APPROVED RESPIRATOR FOR ORGANIC VAPORS SHOULD BE WORN.
Ventilation:LOCAL EXHAUST FOR WORKER COMFORT.
Protective Gloves:POLYETHYLENE/RUBBER.
Eye Protection:ANSI APPVD SAFETY GLASSES .
Other Protective Equipment:OTHER CLOTHING AS REQUIRED TO PROTECT SKIN.
EMERGENCY EYE BATH & DELUGE SHOWER MEETING ANSI DESIGN CRITERIA .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
PH (5% BY WT IN WATER):7-8.

Boiling Pt:B.P. Text:>400F,>204C
Vapor Pres:0.01@68F
Vapor Density:1.01
Spec Gravity:1.1-1.15
pH:SUPDAT
Evaporation Rate & Reference:LOW(BUTYL ACETATE=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:THICK RED LIQUID WITH PLEASANT ODOR

Stability Indicator/Materials to Avoid:YES
AVOID STRONG REDUCING AGENTS.
Stability Condition to Avoid:TEMPS ABOVE 176F (80C), METALS AND THEIR
SALTS.
Hazardous Decomposition Products:AT HIGH TEMPS: CO, CO*2, AND OTHER
ORGANICS.
Conditions to Avoid Polymerization:TEMPS ABOVE 176F(80C), METALS AND
THEIR SALTS.

Waste Disposal Methods:REMOVE ABSORBED MATERIAL TO WASTE DISPOSAL
FACILITY OPERATING IN COMPLIANCE WITH STATE, LOCAL AND FEDERAL
REGULATIONS. DISCARD CONTAMD CLTHG.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.